Cord Master Engineering
1544 Curran Highway
North Adams, MA 01247
Hours: Monday-Friday 8am-5pm

Building Cable Harnesses

custom cable harness building cable harnesses

Cord Master Engineering is an expert at building cable harnesses.

What is involved with building cable harnesses?

“Cable harnesses are usually designed according to geometric and electrical requirements. A diagram is then provided (either on paper or on a monitor) for the assembly preparation and assembly.

The wires are first cut to the desired length, usually using a special wire-cutting machine. The wires may also be printed on by a special machine during the cutting process or on a separate machine. After this, the ends of the wires are stripped to expose the metal (or core) of the wires, which are fitted with any required terminals or connector housings. The cables are assembled and clamped together on a special workbench, or onto a pin board (assembly board), according to the design specification, to form the cable harness. After fitting any protective sleeves, conduit, or extruded yarn, the harness is either fitted directly in the vehicle or shipped.”

Source: https://en.wikipedia.org/wiki/Cable_harness

Posted Under: Blog